Skip to main content

Magpie testing results part 2

The second major ad campaign launched on the twitter powered magpie service is over and I have been pouring over the results to try and make sense out of the results and try to refine the campaign or possibly abandon the use of the service. As discussed in a previous post, I found the magpie test campaigns I ran for www.numeroom.com and for the sent2null.spreadshirt.com sites to be more efficient in targeting relevant users than the Facebook tests I performed last month, however, getting clicks to the link doesn't necessarily convert to signed up users in numeroom.com or a purchase of a product at the sent2null shop. This latest campaign shows this clearly in both campaigns which I'll discuss separately below.

sent2null shop ad campaign #2

After getting a good amount of clicks for the ad service purchased I decided to fund a $40 campaign with magpie for the ad that I had run during the test campaign. The actual test ad text:

Check out sent2null shop for getting custom limited edition tees. Sarcastic, graphic and geek designs reign. http://sent2null.spreadshirt.com

According to the magpie statistics the ad was clicked on 553 times but was shown to 11,051 twitter followers for a click rate of 5% which is quite good, unfortunately none of those clicks turned into a purchase at the site. There can be many reasons for that, my designs could suck and no users found them appealing or too expensive, the link could have failed for many followers, or the followers clicking are coming from outside the US and are unable to purchase using a credit card or finally, the keywords I've targeted are not bringing the people that want to purchase shirts though it may bring people that don't mind perusing designs. The difference is important. The possibility of foreign clicks is ruled out by the metrics that magpie makes available for each campaign to find out the geographic location of most of the clicks, it confirms an overwhelming majority of clicks came from the US. The possibility of link failures is possible but likely to be very rare and not contribute much to the number of people that clicked, that leaves two possibilities...sucky designs on my part and selection of viewers with badly targeted keywords as opposed to prospective purchasers. Assuming my designs are good enough, and not overly expensive (most shirts under $25) the targeting could be the problem, so I adjusted the keywords to restrict to words that are more likely to attract design purchaser clicks over design viewer clicks.

The new keywords for the next campaign will be:
custom-clothing funny geek limited-edition math nerd nerd-fashion sarcastic science shirts t-shirts tees witty

I reduced the set to less general words and created hyphenated sets of words to describe specific targets. The words "geek" , "funny" , "science" , "math", "nerd" and "witty" are not shirt specific but should target users that would find my designs which focus on those topics more useful. The explicit use of "shirts" , "t-shirts" and "tees" should ensure more specific targeting of followers that are actually looking to purchase items related by the other terms. So I think I'll get both a higher click through rate and finally a positive conversion rate from this new campaign we shall see.


numeroom ad #2

Simultaneously with the sent2null ad I bought the same amount of ad purchasing power for the following numeroom ad:

group chat in any language, share any file, link rooms, follow friends, IM, message, securely, join free: http://www.numeroom.com

This campaign had the following keywords:

attach bookmark business-collaboration chat chat-room customer email embed feed file file-share files follow following invite language link secure service translation

and is subject to similar reasons for not being able to generate conversion (in this case measured simply by the amount of users that create a free numeroom account after coming to the site). The design could be confusing, link redirect could fail, or the keywords chosen were just targeting the curious and not those interested in using the service. The corresponding click numbers for this campaign show that it was delivered to 8,650 followers of which 216 are reported to have cliked through to the site. In the time the ad ran however, not a single user targeted from the campaign created a free account. Though I think it is unlikely that the same fate would befall two different campaigns for two completely different businesses, it could point at a common problem in the targeting of the campaigns, so this campaign will be changed to remove and make the keywords more specific for the next run, the new keywords to hopefully target people that will sign up for the free trial are:

business-collaboration chat chat-room web-chat customer-service email feed file-share language-translation translate collaborate web-im group-chat

This shorter and more focused set of keywords should pull out more account sign ups from those that click through.

So here I go on round 3 of the great marketing and sales expedition. When the campaigns are over I'll provide an analysis which hopefully will finally show some good news in the form of actual conversions from the clicks!

As a final method to ensure that the metrics being reported by magpie match what is occurring at the actual links I have enabled google analytics on the pages targeted by the magpie ad links for both campaigns. Google Analytics allows detailed break down of visitors to the page including the ability to track their navigation history on the site once they land on the site, this will allow me to determine if users are being hung up by a particular page so that I can potentially redesign the pages to make them more clear. It will also allow me to keep magpie honest as I compare the reported clicks to the received clicks at the site. This will be very revealing of what the ultimate source of the lack of conversions for both sites really is and will cost me only $80.00, not bad considering all the detailed visibility that I am getting into the campaigns and the demographics of visitors.

stay tuned.

Comments

Custom T-shirts said…
What a nice blog you have..thanks for all this information

Popular posts from this blog

the attributes of web 3.0...

As the US economy continues to suffer the doldrums of stagnant investment in many industries, belt tightening budgets in many of the largest cities and continuous rounds of lay offs at some of the oldest of corporations, it is little comfort to those suffering through economic problems that what is happening now, has happened before. True, the severity of the downturn might have been different but the common factors of people and businesses being forced to do more with less is the theme of the times. Like environmental shocks to an ecosystem, stresses to the economic system lead to people hunkering down to last the storm, but it is instructive to realize that during the storm, all that idle time in the shelter affords people the ability to solve previous or existing problems. Likewise, economic downturns enable enterprising individuals and corporations the ability to make bold decisions with regard to marketing , sales or product focus that can lead to incredible gains as the economic

How many cofactors for inducing expression of every cell type?

Another revolution in iPSC technology announced: "Also known as iPS cells, these cells can become virtually any cell type in the human body -- just like embryonic stem cells. Then last year, Gladstone Senior Investigator Sheng Ding, PhD, announced that he had used a combination of small molecules and genetic factors to transform skin cells directly into neural stem cells. Today, Dr. Huang takes a new tack by using one genetic factor -- Sox2 -- to directly reprogram one cell type into another without reverting to the pluripotent state." -- So the method invented by Yamanaka is now refined to rely only 1 cofactor and b) directly generate the target cell type from the source cell type (skin to neuron) without the stem like intermediate stage.  It also mentions that oncogenic triggering was eliminated in their testing. Now comparative methods can be used to discover other types...the question is..is Sox2 critical for all types? It may be that skin to neuron relies on Sox2

AgilEntity Architecture: Action Oriented Workflow

Permissions, fine grained versus management headache The usual method for determining which users can perform a given function on a given object in a managed system, employs providing those Users with specific access rights via the use of permissions. Often these permissions are also able to be granted to collections called Groups, to which Users are added. The combination of Permissions and Groups provides the ability to provide as atomic a dissemination of rights across the User space as possible. However, this granularity comes at the price of reduced efficiency for managing the created permissions and more importantly the Groups that collect Users designated to perform sets of actions. Essentially the Groups serve as access control lists in many systems, which for the variable and often changing environment of business applications means a need to constantly update the ACL’s (groups) in order to add or remove individuals based on their ability to perform cert